Also if it helps, i have attached a wiring diagram containing only items nessesary to run the bike (no lights or switches).
I did this because i am also planning on using the m-Unit, and found it gave me an overview of what original wires not to cut :-)
Thanks! Could come in handy if I need to re-check the wiring.
So I want to get the MaruLabs BEP 3.0 magic box to make the stock speedo sensor work, but Cafe4Racer.eu is sold out and the MaruLabs website hasn't replied to my email request to order.
Does anyone know where else to order them?
@Boxermann, did you do the mod of flipping the fuel level sensor to get the signal right to work with the motogadget instrument cluster?
if you did, are there any recommendations or a bit of wisdom you can share in-case something goes wrong to fix it?
Just keep mailing Marulabs, they'll answer eventually. I had to send a couple of emails before I got any response.
I just found out I don't really need the BEP though, since the combination m.unit and motoscope pro with a Breakoutbox takes care of everything.
For the fuel I just had to connect the yellow wire from the tank to the fuel input on the Breakoutbox then go the settings in the motoscope and set where the floater is when it's full and where it is when it's empty. Worked perfectly.
I thought I needed the BEP for the neutral indicator, but I could not make it work with the motoscope. At first I thought maybe I had done something wrong, but then five minutes ago I tried connecting the blue/yellow wire from the gear position switch straight to the neutral input on the Breakoutbox and, hey presto, it worked.