TECHNICAL MOTOBRICK WRENCHING In Remembrance of Inge K. > Project Custom Motobricks

turbo project

(1/1)

85killzillaRS:
85 turbo project
 have the exhaust, turbo, plenum, injectors, fuel pressure reg, vac manifold
need to hook up hot and cold sides, oil feed, return pump, water inter cooler
& quite a few other details  ;-)

l.side.jpg (58.55 kB . 320x228 - viewed 332 times)

td025.jpg (44.33 kB . 240x320 - viewed 325 times)

view.jpg (21.41 kB . 320x265 - viewed 279 times)

seat.jpg (16.42 kB . 240x320 - viewed 327 times)

KCinSB:
Wow!! 😵‍💫 not a project for the faint of Heart!!  Nice work so far! Looks like you are building a K-Rocket!

85killzillaRS:
 :mb: it's a winter project, i'll try to ride it again by next winter ;-)

Arktasian:
Excellent, almost didn't notice this (up in the special section)
Do you have plans to manage fuel/ ignition? Charge air cooler? Edit: just noted you have that on your menu.
I'm rather tardy with my project - it awaits final wiring but life has thrown some family weddings into the mix and that also drives more home reno work.
I've chosen a similar location but have opted to run original exhaust manifold as showing on below attachment. Also, that will provide heat to a bike that has a reputation already for being hot, so I've opted for marine grade heat blankets and a ventilating air system that comes off my A to A. (SS wire used to sew those guys).
Cheers and good luck.

IMG_2094.JPG (46.69 kB . 768x576 - viewed 272 times)

IMG_6446.JPG (42.2 kB . 768x576 - viewed 276 times)

RoyalWaffles:
Heyo, Do we have an update on this project? What have you learned? And have you found the limits of the stock internals for the engine/drivetrain?

Navigation

[0] Message Index