I ran into an issue after changing my oil. The starter spins and that is all. The fuel pump is active and all lights work. I am worried that it is a sprag. I have tried the solution where you spray cleaner in the small hole on the sprag and the same issue persists. Push starting is almost successful, but never fully starts. I have a slight hill in the parking lot i use and start pushing it in neutral then once up to speed i pop it into 2nd and press the starter button while releasing the clutch. I get some sprag activation, but never for long and not enough to get the bike going.
I have tried a charged battery, a new battery but to no avail.
I used mobil 1 15w-50 on the oil change
I am starting to think it is the starter as i did a rebuild, but im pretty sure reassembled it correctly.
Has anyone experienced any issue like this?
Thanks,
Alex