Author Topic: Brake Pedal Spring  (Read 3122 times)

Offline ccjax

  • Curious
  • Posts: 4
Brake Pedal Spring
« on: May 28, 2012, 05:55:11 PM »
The spring on my 85 K100 broke or rusted off.  I have determined that one end attaches so the pedal, but I cannot not for the life of me figure out where the other end attaches.   This seems like it should be fairly simple but I am getting nowhere.  Any help would be appreciated.

Offline billday

  • ^ Quintessential Motobricker
  • Posts: 1341
Re: Brake Pedal Spring
« Reply #1 on: May 28, 2012, 07:52:19 PM »
There's a horizontal post sticking out of your center stand. It has three grooves in it. The inner and outer grooves locate springs for the center stand; the middle groove is where you park that spring off your brake pedal. Hope this helps.
  • New York State, USA 10977
  • 1985 K100

Offline ccjax

  • Curious
  • Posts: 4
Re: Brake Pedal Spring
« Reply #2 on: May 28, 2012, 08:04:15 PM »
Thanks. I was driving myself nuts. 

Offline billday

  • ^ Quintessential Motobricker
  • Posts: 1341
Re: Brake Pedal Spring
« Reply #3 on: May 28, 2012, 09:00:33 PM »
Thanks. I was driving myself nuts.
Well, if you want a job done right, do it yourself.
  • New York State, USA 10977
  • 1985 K100

Tags: