MOTOBRICK.COM
TECHNICAL MOTOBRICK WRENCHING In Remembrance of Inge K. => The Motobrick Workshop => Topic started by: frankenduck on December 19, 2011, 03:05:06 PM
-
I have attached a number of PDFs to this thread for various aftermarket products. Feel free to add to this if you have other suspension related materials.
Ohlins:
General Manual - Basic owner's manual
MC Manual - Owners manual for motorcycle shocks
Ultimate Tuning - How the shocks work and a basic catalog for Ohlins shocks
Ohlins Fine Tuning - A one page "cheat sheet" of notes I put together on dialing in the rebound and compression damping
Fox:
-
Fox:
Fox Manual - Owners manual for Fox TwinClicker shocks
Spring Removal - How to swap springs on a Fox shock
Works Performance:
Works K Bike Shock - How to install a Works shock on a K bike
Works Install Springs - Generic instructions on installing Works dual rate fork springs
Realm RAM Shock: Added on Oct. 24,2010)
Instruction sheet for Realm RAM Shock
-
Thanks, I was about to go searching for just this information. This web site is the greatest!
-
I think that every single person on this forum should send the duck $20 as a thank-you.
-
frankenduck getts nothing till he finishes the post with the info on the...
yss
wilbers
hagon
elka
ram
racetech
progressive
eibach
penske
koni
monroe
j o
-
well then, thanks Johnny. Duck: I've put a stop-payment on my check that I sent to you. You cannot cash it till your assigned tasks are completed.
-
Realm RAM shock instructions added to Reply #1 above.
-
Thanks all for the Works info. Puts me on the right track to do some troubleshooting for a possible leak.
Pebco :beer:
-
I am presently rebuilding a works shock for my K75. Works closed about a year ago and has supposedly reopened as Worx. I got parts and rebuild info from Thor's Evolution Suspension Parts:
http://www.evolutionsuspensionproducts.com/
They also have the manual online:
http://www.evolutionsuspensionproducts.com/jpgsale/sb_reservoir_service.pdf
I have tried to email Worx a week ago, but so far have not received a reply. I wonder if they have gone under again.
-
I have tried to email Worx a week ago, but so far have not received a reply. I wonder if they have gone under again.
Hope they are still in business, I have a Works on my '91 R100RT.
-
I might try calling next week.
The shock on my K75S was one of the last jobs they did before they closed the first time. I remember talking to the service mgr. about getting it shipped before they locked the place up. Almost lost it. Took about two months to get it rebuilt if I recall.
Fortunately, I'm doing the work myself this time. I just have a question about the piston valve springs.
-
I miss Drake (Frankenduck).
-
Drake is pretty active over at the K100 forum.
http://www.k100-forum.com
-
Drake is pretty active over at the K100 forum.
http://www.k100-forum.com
Yeah but I like it better over here at Motobrick.
-
I just bought a YSS shock with an updated spring. Job done.