Author Topic: Failure to start, blown fuse to trickle charger  (Read 134 times)

Offline K100 Dave

  • Curious
  • Posts: 1
Failure to start, blown fuse to trickle charger
« on: March 31, 2024, 08:01:03 AM »
Hi all
I wonder if anyone can help with this one, I was plugging in my trickle charger to the sae connector (that is fused and goes to my battery) when it crackled and the charger was flashing (indicating that it isn't charging) so I checked the fuse that is connected to the in the sae cable that is connected to my battery and the 7.5 amp fuse had blown,
Not a big deal, but now my bike won't start, it turns over and I can hear the fuel pump.
I checked to spade fuses on the side of the bike but all seem fine, somthing has blown but at the moment I'm not sure what ?
  • Uk, wigan, Lancashire
  • BMW K100 RT

Offline Laitch

  • Faster than a speeding pullet
  • Administrator
  • ^ Quintessential Motobricker
  • Posts: 10214
Re: Failure to start, blown #7 fuse
« Reply #1 on: March 31, 2024, 09:21:37 AM »
Welcome to the forum, Dave. Tell us the year of your Brick, how long you've had it, how many miles on its odometer and how many miles you've put on it.

  • Along the Ridley in Vermont.
  • 1995 K75 89,000 miles

Tags: