MOTOBRICK.COM
TECHNICAL MOTOBRICK WRENCHING In Remembrance of Inge K. => The Motobrick Workshop => Topic started by: KosmicK1100 on January 10, 2019, 10:13:18 PM
-
This photo from a random K1100RS
(https://4.bp.blogspot.com/-yxlDg2TVDOQ/XDgHe6YaOdI/AAAAAAAABcI/JiXYmu2BwWUy7X4iSNV0WU1OkgqK2lxdACLcBGAs/s1600/IMG_6965.jpg)
This photo is my Virtual K1100RS which I have yet to see in person.
(https://2.bp.blogspot.com/-lgkd7jHO48Y/XDgHe6C2JvI/AAAAAAAABcM/tuQEKAtzzpgm-PLUWb-KIRAfF2KgilW0QCLcBGAs/s1600/IMG_0882.jpg)
-
greetings...
the top photo is oe banjo with rubber brake line...
the bottom photo is aftermarket banjo with looks to be steel brake line...
j o
-
+1 on the JoMan's reply.
Someone has replaced the old brake lines with stainless braided lines. A very good upgrade.
-
Thanks guys! More evidence that the bike has been in good hands.
-
greetings...
gotts to axe yourself... would i rather my moto been in good hands or skilled hands...
j o
-
greetings...
gotts to axe yourself... would i rather my moto been in good hands or skilled hands...
j o
I definitely prefer skilled hands over good hands! It is a bonus when the hands are skilled, good and loving.
(https://2.bp.blogspot.com/-RDy4vhEiQNQ/WxHTJq_9CgI/AAAAAAAABKA/sq6Jn71dp0gT7nFBynuDjoUoVg3P8wN7wCLcBGAs/s1600/asdfaksltrol.jpg)
-
Is the press to push the piston into the cylinder? :)
-
Is the press to push the piston into the cylinder? :)
Everyone knows that pistons must be a press fit into the cylinder! They run really quite that way.
-
greetings...
gotts to axe yourself... would i rather my moto been in good hands or skilled hands...
j o
I got to axe myself . . . Why not both?