MOTOBRICK.COM

TECHNICAL MOTOBRICK WRENCHING In Remembrance of Inge K. => The Motobrick Workshop => Topic started by: wmax351 on June 03, 2013, 11:40:24 PM

Title: K100 2V Bearing Cross Reference ~ author bert vogel
Post by: wmax351 on June 03, 2013, 11:40:24 PM

Bump for new bearing cross ref

K100 2V Bearing Cross Reference ~ author bert vogel (http://hrsbstaff.ednet.ns.ca/bvogel/K100/download/bearings_equivalency_chart.htm)

It seems NTN or SNR (or other) 32203 bearings will be a direct replacement for the swingarm bearings on our bricks. 17x17.25x40. The width on these is measured differently on different sites, but it is an exact match for what we need. These bearings seem to be hard to find, but I managed to find some SNR brand bearings from www.motionindustries.com (http://www.motionindustries.com). They are apparently a super heavy duty series that usually doesn't start that small.

Title: Re: K100 2V Bearing Cross Reference ~ author bert vogel
Post by: dglcinc on March 07, 2016, 08:01:10 PM

Thanks, I just realized I forgot I used this reference when I did some maintenance last Spring. Some of these are available on Amazon and E-Bay. I also just found another source for the swingarm bearings (ordered some just in case): LocateBallBearings.com.

Awesome cross reference, thanks for posting.