TECHNICAL MOTOBRICK WRENCHING In Remembrance of Inge K. > Project Sidecar Motobricks

Brakes on earles fork front end


Anyone have issued trying to bleed brakes on earles fork front ends where the calipers are underneath, about 4 o'clock position?  I can't get pressure to build in my system.  Everything is new except the body of the calipers and the body of the master, new internals, new lines etc.
What am I missing?

What am I missing?
You have more diagnostic options. These are among them.

* Empty the master cylinder reservoir. Verify that neither of the ports in the master cylinder piston is clogged. They can be cleaned with fine wire.
* Verify that the piston moves smoothly and fully through its stroke.
* If those conditions have been met, try this.


[0] Message Index

Go to full version