Hi again,
Yesterday I started to rebuild the wiring to set up the final dispaly, but I have a problem with neutral. After lots of hours of no start of the bike, I detected thtat the neutral switch didn't work, so there were no signal to start, I made connection between the two pins and the bike started. But after that, my koso doesn't show N.. I have connected the black/green wire to the neutral wire in the koso, and it doesn't work.
After I found the problem with the neutral switch, the bike didn't start, and it didn't show N, but when I pushed the start button the N lights. Now that the bike starts but doesn't shows N, the only moment it is on is whem I stop the bike, during the short period of time I remove the key.
Anyone has any idea?
Best regards,