Author Topic: Increased height on windshield for 1985 K100RT  (Read 1042 times)

Offline pinhead

  • ^ Proficient Motobricker
  • Posts: 123
Increased height on windshield for 1985 K100RT
« on: March 04, 2021, 01:26:44 PM »
I need a higher windshield or a product I could attach to extend the height of my stock windshield.  Any recommendations?  thanks!
  • sacramento, ca
  • 1985 RT 100

Offline The Mighty Gryphon

  • Administrator
  • ^ Quintessential Motobricker
  • Posts: 6615
  • In my garage in Marilla, NY
  • '91K100RS White/Blue
Current:
'91 K100RS16V "Moby Brick Too"

Past:
'94 K75RT "Ilsa, She Wolf of the SS"
'92 K100RS16V "Moby Brick" (RIP, deceased in a vehicular assault)
'94 K75S Special Edition Dakar Yellow "Cheetos"
'89 K100RS Special Edition "Special Ed"

Offline mw074

  • ^ Proficient Motobricker
  • Posts: 452
Re: Increased height on windshield for 1985 K100RT
« Reply #2 on: March 04, 2021, 03:23:23 PM »
 I have had success using a Laminar Lip. Inexpensive and easy to install.

 https://www.laminarlip.com

  • Michigan

Offline daveson

  • ^ Quintessential Motobricker
  • Posts: 1027
Re: Increased height on windshield for 1985 K100RT
« Reply #3 on: March 04, 2021, 06:35:26 PM »
In the "project classic motobricks" section, is a thread, "taller windscreen, less wind noise" at the moment it's about half way down page two.
  • Victoria, Australia
  • Current;'85 K100RT~100,000km; four other bricks. Past; 1500 Vulcan, V Star 650, KLX 250(dirt bike) TT250(dirt bike)

Offline pinhead

  • ^ Proficient Motobricker
  • Posts: 123
Re: Increased height on windshield for 1985 K100RT
« Reply #4 on: March 06, 2021, 04:28:43 AM »
thanks for the input!  I will check these suggestions out.
  • sacramento, ca
  • 1985 RT 100

Tags: