Author Topic: FS/FT K75T Parts  (Read 3113 times)

Offline ibexonabike

  • ^ Motobrick Curious
  • Posts: 50
  • Ibex - Rugged & Capable
FS/FT K75T Parts
« on: April 12, 2018, 12:01:55 AM »
Doing a project (shoot me), have parts I no longer need


- $40 - Front faring, same as "naked" K100, has a crack on right side near signal mount
- $75 - headlight
- $50 - Front fender (both halves and the center mount)
- $50 - S handle bars
- $40 - C/T handle bars
- $100 - Gauges, with 52k on the Odometer. Set works well, needs two back-light bulbs, and one fuel level bulb
- $75 ea - Side Cases. Both have cracks, one on the inside half, one on the outside, don't remember which is left-right at the moment
- $35 ea - Side case mounting rails
- $25 ea - Side battery covers (original dark blue)
- $50 - Tail light
- $40 - Rear cowl/seat pan assembly
- $25 ea - Rear blinkers
- $100 - Corbin canyon seat. Leather is in good condition, the center stitch needs to be re-done
- $15 - Rear mudflap

https://www.dropbox.com/sh/rpbjypvknlcpmyt/AAD2caclUOrvbGmos4zGd3AYa?dl=0

I am interested in a K100 single piece front fender and K75S final drive & wheel (disk brake w/17" rim).

Email me for any/all the things. I'm in southern NH if anyone local wants to meet up.
1987 BMW K75C(T): Ibex
1988 Kawasaki EL 250 : Not-a-Ninja

Online Laitch

  • Faster than a speeding pullet
  • Administrator
  • ^ Quintessential Motobricker
  • Posts: 10180
Re: K75T Parts FS/FT
« Reply #1 on: April 12, 2018, 05:37:41 AM »
                                                                                 Doing a project (shoot me) . . .
:machinegun:
  • Along the Ridley in Vermont.
  • 1995 K75 89,000 miles

Offline ibexonabike

  • ^ Motobrick Curious
  • Posts: 50
  • Ibex - Rugged & Capable
Re: K75T Parts FS/FT
« Reply #2 on: April 18, 2018, 10:57:21 PM »
Tragkorb? Really? That should be "hard cases", or, "tragkorbs".




Tragkorb? :dunno
1987 BMW K75C(T): Ibex
1988 Kawasaki EL 250 : Not-a-Ninja

Offline ibexonabike

  • ^ Motobrick Curious
  • Posts: 50
  • Ibex - Rugged & Capable
Re: K75T Parts FS/FT
« Reply #3 on: May 01, 2018, 06:33:25 AM »
 bmp
1987 BMW K75C(T): Ibex
1988 Kawasaki EL 250 : Not-a-Ninja

Offline ibexonabike

  • ^ Motobrick Curious
  • Posts: 50
  • Ibex - Rugged & Capable
Re: FS/FT K75T Parts
« Reply #4 on: May 22, 2018, 11:01:35 PM »
Still have some good parts, still looking for a K100 single piece front fender and a K75S final drive.
1987 BMW K75C(T): Ibex
1988 Kawasaki EL 250 : Not-a-Ninja

Tags: