Author Topic: WTT Engine protection bars for k75s or standard  (Read 1226 times)

Offline lefthander

  • ^ Motobrick Curious
  • Posts: 84
WTT Engine protection bars for k75s or standard
« on: November 14, 2023, 04:12:25 AM »
Long shot here, but I purchased engine protection bars for all other K75 except the rt model

Anyone have a set for the rt they would like to trade for the set I have?
 Let me know. The set I have is in very good shape and are black with some detachable highway pegs.
Thank you,
Lefthander
  • Savannah GA
  • 1992 k75, 2002 1150gs

Offline Laitch

  • Faster than a speeding pullet
  • Administrator
  • ^ Quintessential Motobricker
  • Posts: 10611
Re: WTT Engine protection bars for k75s or standard
« Reply #1 on: November 14, 2023, 11:40:05 AM »
There is no dedicated engine protection bar for the K75RT except the police version which is rarely up for sale worldwide. You should publish a photo of the bars you're seeking. The standard protection bars can be fitted to an RT but holes need to be made for them to attache to the engine. A drop can crack the fairing when they're mounted on an RT, LT or through the belly pan of an S.

Below are two photos of standard engine protection bars on an RT and LT. Following them are police-style bars on an ex-police-version RT and a naked K75.
  • Along the Ridley in Vermont.
  • 1995 K75 89,000 miles

Offline beemuker

  • ^ Quintessential Motobricker
  • Posts: 1110
Re: WTT Engine protection bars for k75s or standard
« Reply #2 on: November 14, 2023, 01:48:09 PM »
Long shot here, but I purchased engine protection bars for all other K75 except the rt model

Anyone have a set for the rt they would like to trade for the set I have?
 Let me know. The set I have is in very good shape and are black with some detachable highway pegs.
Thank you,
Lefthander
I might trade for some switch plate covers,  :laughing4-giggles:
  • Panama City, FL
  • '00 R1100RT,’92 K75 RT,past tense:'83 R80ST, '93 K1100LT,,94 R1100RS K75s, Honda NC700, Suzuki Bandit 1200, bmw R75/5 Honda 750

Offline lefthander

  • ^ Motobrick Curious
  • Posts: 84
Re: WTT Engine protection bars for k75s or standard
« Reply #3 on: November 16, 2023, 05:59:53 AM »
Thanks Laitch,
And the plate switches are coming. Finally recovered from a ten day stretch of COVID.
  • Savannah GA
  • 1992 k75, 2002 1150gs

Offline triplek

  • Motobrick Curious
  • Posts: 47
Re: WTT Engine protection bars for k75s or standard
« Reply #4 on: January 18, 2024, 12:08:55 PM »
The third image, the white police bike, is mine.  :0
"Every time you criticize my grammar, I like you a little bit fewer."

1995 K75 RTP, 1995 K75 RT, 1993 K75, two K75 frames, 1 fully assembled engine from airbox to exhaust tip and enough fairings and  parts to build another K. Soon.  ;)

Offline frankenduck

  • Adrninistrator
  • ^ Quintessential Motobricker
  • Posts: 5213
Re: WTT Engine protection bars for k75s or standard
« Reply #5 on: January 18, 2024, 01:47:39 PM »
There is no dedicated engine protection bar for the K75RT except the police version which is rarely up for sale worldwide.

Not true. There are three sets (ignoring black vs chrome) of K75 engine bars.

One set fits non-RT models. You can see here that the 46712303181 bars only fit standard, C and S models.
https://www.realoem.com/bmw/enUS/partxref?id=0571-USA-02-1995-K569-BMW-K_75_85_0562,0571_&mg=46&sg=70&diagId=46_1274&q=46712303181&series=K569

The K75RT civilian bars are slightly wide to accommodate the RT fairing lowers:
https://www.realoem.com/bmw/enUS/partxref?id=0573-USA---K569-BMW-K+75+RT+(0565,0573)&mg=46&sg=70&diagId=46_1274&q=46712315684&series=K569

And then there's the really wide police bars made to hold aux lights.
Once I had a Collie pup. Dug a hole and covered him up. Now I sit there by the hour. Waiting for a Collie-flower.
New to K bikes? Click here.
K Bike Maintenance & Mods: Click here.
Buy parts here.

Offline Laitch

  • Faster than a speeding pullet
  • Administrator
  • ^ Quintessential Motobricker
  • Posts: 10611
Re: WTT Engine protection bars for k75s or standard
« Reply #6 on: January 18, 2024, 11:47:57 PM »
You can see here that the 46712303181 bars only fit standard, C and S models.
https://www.realoem.com/bmw/enUS/partxref?id=0571-USA-02-1995-K569-BMW-K_75_85_0562,0571_&mg=46&sg=70&diagId=46_1274&q=46712303181&series=K569
Why do the text lines in the above link seem to indicate in parentheses that a 46712303181 can be found on a K75RT?
  • Along the Ridley in Vermont.
  • 1995 K75 89,000 miles

Tags: