MOTOBRICK.COM
TECHNICAL MOTOBRICK WRENCHING In Remembrance of Inge K. => Project Custom Motobricks => Topic started by: Postman on August 20, 2017, 11:57:12 AM
-
Greetings from Finland! Started my project yesterday. Welding will be next work.
Where do you replace horns or just cut wires off? There is a space for one horn on the right side over the engine(behind the radiator).
I'm gonna cut original exhaust shorter and use it.
Has anyone made a seat platform from fiberglass?(https://uploads.tapatalk-cdn.com/20170820/29ba79c33a72413831dcd614b6f01888.jpg)(https://uploads.tapatalk-cdn.com/20170820/92bd3f6e0c7d56068122c044129b83fd.jpg)
Lähetetty minun SM-G800F laitteesta Tapatalkilla
-
Greetings from Finland! Started my project yesterday. Welding will be next work.
Where do you replace horns or just cut wires off? There is a space for one horn on the right side over the engine(behind the radiator).
I'm gonna cut original exhaust shorter and use it.
Has anyone made a seat platform from fiberglass?(https://uploads.tapatalk-cdn.com/20170820/29ba79c33a72413831dcd614b6f01888.jpg)(https://uploads.tapatalk-cdn.com/20170820/92bd3f6e0c7d56068122c044129b83fd.jpg)
Lähetetty minun SM-G800F laitteesta Tapatalkilla
evening
horn i mounted on hole in front of tank looks ok,well i think it does
-
Ok. Thanks! Do you have any photos of those horn mountings?
Lähetetty minun SM-G800F laitteesta Tapatalkilla
-
Hi I have made mine using the tailpiece from an RT and strong plastic cut to shape some use steel and I've even seen wood used. Not quite finished yet but I think it doesn't look too bad
Sent from my iPhone using Tapatalk
-
you have done fine job on trim i did one today and is bland compared to yours keep the progress shots coming :2thumbup:
-
Finally cutting the frame and welding(https://uploads.tapatalk-cdn.com/20171031/2f360f865ced938f4e803e2ce661e845.jpg)(https://uploads.tapatalk-cdn.com/20171031/196c07671d0416847a1e80d343a05f52.jpg)(https://uploads.tapatalk-cdn.com/20171031/5be75c6a10319195b7fbd4cac7c0346e.jpg)(https://uploads.tapatalk-cdn.com/20171031/c9dd1b69d8b6682e095079e840db9d15.jpg)(https://uploads.tapatalk-cdn.com/20171031/b8febd640dda2df5bfd95de0380e0db3.jpg)
Lähetetty minun SM-G390F laitteesta Tapatalkilla
-
Proggress or not but frame welded. Ignition key replaced to airbox. Next steps:
- fork gaiters
- speedometer
- seat frame laminating
- new handlebars
- Heidenau K60 tyres
- tank paint strip
- leather bags for triangles
- new rear brake fluid container
- front fender cut
- horns relocation
Still wondering about those horns how to relocate????
Still asking photos of horn relocations?(https://uploads.tapatalk-cdn.com/20180114/aae1a051367b611e207f15db8829fdf3.jpg)
Lähetetty minun SM-G390F laitteesta Tapatalkilla
-
Seat platform(https://uploads.tapatalk-cdn.com/20180122/834f9b2356ff3ecbc4201542707f4c8a.jpg)
Lähetetty minun SM-G390F laitteesta Tapatalkilla
-
Greetings from a Swede in Norway.
I bought a small and cheap (3 usd) horn on eBay and placed it behind the radiator. Works great. Can't say I've used it much though...
Will try to take a picture when I get home.
-
You can see it here in the second picture: http://www.motobrick.com/index.php/topic,9158.msg84663.html#msg84663
-
Thanks boxermann
Lähetetty minun SM-G390F laitteesta Tapatalkilla
-
Paint stripped from fuel tank(https://uploads.tapatalk-cdn.com/20180204/d19dd905e13dca7a0e959810911ea43f.jpg)
Lähetetty minun SM-G390F laitteesta Tapatalkilla
-
Todays job. Two new horns hidden behind radiator under the tank. BEP3.0 wired.(https://uploads.tapatalk-cdn.com/20180210/a13060b4e364b0089c3a944c8794ec5f.jpg)(https://uploads.tapatalk-cdn.com/20180210/fe235b834032af2e5f9a270d561c19f2.jpg)
Lähetetty minun SM-G390F laitteesta Tapatalkilla
-
Just Saying
http://www.motobrick.com/index.php/topic,10818.msg93595.html#msg93595
-
Some progress..(https://uploads.tapatalk-cdn.com/20180302/e935c114f5a6782a25f4d1d9ceb12420.jpg)(https://uploads.tapatalk-cdn.com/20180302/51b8208a61caa9e454bf18479d2f579e.jpg)
Lähetetty minun SM-G390F laitteesta Tapatalkilla
-
Bar end indicators and seat(https://uploads.tapatalk-cdn.com/20180308/540c85d513a0b5f60eca01bc1b08fd4b.jpg)
Lähetetty minun SM-G390F laitteesta Tapatalkilla
-
This is looking lovely, Postman. I especially love the tan colour of your seat. Do you have any more pictures of the finished rear hoop? I’m on two minds at the moment on wether to use the original frame tube that reduces or to replace with 30mm all round on my own build, wasn’t sure how it would look.
-
Thanks! My plan is to make short rear fender with LED rear light and licence plate. I have small 15mm LED indicators for rear. Not sure how to put those but will see what happens.
I used original rear end of the frame which is shortened about 20cm. More photos later..
Lähetetty minun SM-G390F laitteesta Tapatalkilla
-
Springtime(https://uploads.tapatalk-cdn.com/20180419/a607d1e82f25e0570cd4ca863a6d0b3d.jpg)(https://uploads.tapatalk-cdn.com/20180419/0c573455d596a36dd59e7d579e372154.jpg)(https://uploads.tapatalk-cdn.com/20180419/7fa2137d25a07361db1ec11621ec386c.jpg)
Lähetetty minun SM-G390F laitteesta Tapatalkilla
-
After first ride(https://uploads.tapatalk-cdn.com/20180507/b7242d825070517d87d989fd067f16ea.jpg)(https://uploads.tapatalk-cdn.com/20180507/9b581c8e7d223779785425d18dad4a4e.jpg)(https://uploads.tapatalk-cdn.com/20180507/729f4183f8c25d65b3baf1a088d3b4bf.jpg)(https://uploads.tapatalk-cdn.com/20180507/7b54cb0ac19b37d9fa27e34310c6b290.jpg)(https://uploads.tapatalk-cdn.com/20180507/333382c921544df64b906fc22a3e4c4a.jpg)
Lähetetty minun GT-I9195I laitteesta Tapatalkilla
-
Tail(https://uploads.tapatalk-cdn.com/20180507/cf961c0892ceef8e541dea1347beee9b.jpg)
Lähetetty minun GT-I9195I laitteesta Tapatalkilla
-
Let's see the right-side profile.
-
Right side(https://uploads.tapatalk-cdn.com/20180507/7e061aa498fd5b21f1647f4e1d590597.jpg)
Lähetetty minun GT-I9195I laitteesta Tapatalkilla
-
[emoji1303] Great looking bike
Sent from my iPhone using Tapatalk
-
Very nice! Did you make the bag and seat yourself?
-
Thanks! Seat platform is DIY from fiberglass. Cushion and upholstery was made in local upholstery shop.
Triangle bags are handmade in Italy. Thanks to @Enfield for a hint!
Lähetetty minun GT-I9195I laitteesta Tapatalkilla