MOTOBRICK.COM

TECHNICAL MOTOBRICK WRENCHING In Remembrance of Inge K. => Project Custom Motobricks => Topic started by: dwatson on February 18, 2017, 04:41:25 PM

Title: Please identify their purpose
Post by: dwatson on February 18, 2017, 04:41:25 PM

I'm pretty sure these holder straps go under the seat at the front rear fender bracket.  What is their purpose?  And is there a specific orientation?


I have just completed rebuilding the rear brake caliper and am putting the bike together and can't remember how or to what they were attached to.   


Thanks in advance

Title: Re: Please identify their purpose
Post by: Martin on February 18, 2017, 04:50:26 PM

Non OEM possibly for attaching a seat bag?
Regards Martin.

Title: Re: Please identify their purpose
Post by: riots100 on February 18, 2017, 06:31:55 PM

They are the tool strap holders that hold the BMW tool roll.  They install under the seat using the bracket that holds on the rear inner fender.

Title: Re: Please identify their purpose
Post by: duckhawk on February 18, 2017, 06:40:49 PM

Helmet locking straps is what I use them for.

Title: Re: Please identify their purpose
Post by: dwatson on February 18, 2017, 06:54:02 PM

Thanks for the responses.  I have the tool kit stuffed in the rear cowl presently so may look into utilizing them to put tire repair kit and compressor in the cowl

Title: Re: Please identify their purpose
Post by: Elipten on February 18, 2017, 07:42:12 PM

 Interesting, were never present on my 1990 K75RT and I bought the bike new in 1990from dealer so unless they removed before delivery, they were not on my bike.


Sent from my iPad using Tapatalk

Title: Re: Please identify their purpose
Post by: johnny on February 18, 2017, 09:09:14 PM

greetings...

tragkorb tethers...

j o