Gear Indicator is Reversed

[Justdirt]

 :yow I reinstalled my Instrument Panel.  Everything is working correctly except the gear indicator.  First Gear is now showing a " 5".  I would appreciate any suggestions on what I can do to correct the problem.

[Inge K.]

You have probably bad connection at the yellow/white wire at pin #2 at the cluster connector.
Then you would have strange numbers in all gears exept #4.

[Justdirt]

You have probably bad connection at the yellow/white wire at pin #2 at the cluster connector.
Then you would have strange numbers in all gears exept #4.

Thank you.  I will pull the cluster connector and inspect.

[Inge K.]

The problem could of course be elsewhere in this circuit, but most likely at the cluster connector as you
just had it reinstalled.
The yellow/white wire should be connected to ground (at the gearbox switch) in all gears (also neutral)
exept fourth and fifth.

[Justdirt]

You have probably bad connection at the yellow/white wire at pin #2 at the cluster connector.
Then you would have strange numbers in all gears exept #4.

Hello Norway, home of the World Chess Champion Magnus Carlson!  Thank you for the help, my cluster is repaired.  Have a great week.

[Motorhobo]

Amazing...how could anyone know so much about anything?

Sorry...this post has so informational value except to marvel at Inge's infinite Kbike knowledge.

[Uffda]

 :2thumbup:

...except to marvel at Inge's infinite Kbike knowledge.

[blakey]

I've said it before and I'll say it again, Inge is a machine and not a person!  :dunno2:

Don't let the cute looking avatar fool you...

[Inge K.]

 .