« previous next »
Pages: [1]   Go Down

Author Topic: Radial on K75  (Read 2629 times)

Offline Gru

  • Motobrick Curious
  • Posts: 25
Radial on K75
« on: July 24, 2018, 11:36:45 AM »
I have a K75, 1995, with 3.0 tear three spoke wheel. I want to put a 15/70/17 rear wheel on, has a shim in the wheel, but the radial  is 11mm wider than the stock bias tire. will it work, or will I have to add another shim.
Logged
  • Village Mills
  • K75, "CB 500x, Versys 1000, W650, FZ 07
15 Versys 1000, 15 FZ 07, 13 CB500X,          02 W650, 95 K75

Offline johnny

  • TrailBrakingThrottleWhacker
  • ^ Quintessential Motobricker
  • Posts: 7650
  • Whacking...n...Chopping Sliding...n...High Siding
Re: Radial on K75
« Reply #1 on: July 24, 2018, 03:58:15 PM »
greetings...

i went 3 spacers with no adverse effects no tior rubb no off tracking whack...

all these things are tweaked... frames swingarm bushings wheels... gonna have to mess with it...

i can tell you to check tior rubb while the tiors are hot and loaded...

j o
Logged
  • :johnny i parks my 96 eleven hundert rs motobrick in dodge county cheezconsin  :johnny

Offline rbm

  • ^ Quintessential Motobricker
  • Posts: 2283
Re: Radial on K75
« Reply #2 on: July 24, 2018, 05:50:12 PM »
Too much shimming and you'll scrape the centre stand on the other side. 
Logged
  • Regards, Robert
Toronto, Ontario

1987 K75 - Build Blog @http://k75retro.blogspot.ca/

Offline Gru

  • Motobrick Curious
  • Posts: 25
Re: Radial on K75
« Reply #3 on: August 02, 2018, 10:06:29 PM »
The shims are closer to 1.3mm, hope three will be enough. Tires ordered, shims waiting to have some fun getting things lined up.👍
Logged
  • Village Mills
  • K75, "CB 500x, Versys 1000, W650, FZ 07
15 Versys 1000, 15 FZ 07, 13 CB500X,          02 W650, 95 K75
Pages: [1]   Go Up
« previous next »
Tags: