1
The Motobrick Workshop / Re: Fuel pump does not stay energized while cranking
« Last post by Bigtater on Today at 11:31:34 PM »Thanks for the reply daveson.
I did figure out the issue. It was a two part issue.
First, I re-did the fuel pump connector. At this point, the fuel pump would run constantly. It would run whether the key was on or off, but would lose voltage when attempting to start the bike.
After reviewing the wiring diagrams some more I found I determined to pull the fuel pump relay and preform resistance checks. I found the load side of the relay had continuity constantly. I swapped the relay with a spare relay and boom! Problem solved! The bike now has voltage on the green/white wire while cranking and running.
I did figure out the issue. It was a two part issue.
First, I re-did the fuel pump connector. At this point, the fuel pump would run constantly. It would run whether the key was on or off, but would lose voltage when attempting to start the bike.
After reviewing the wiring diagrams some more I found I determined to pull the fuel pump relay and preform resistance checks. I found the load side of the relay had continuity constantly. I swapped the relay with a spare relay and boom! Problem solved! The bike now has voltage on the green/white wire while cranking and running.