Author Topic: You Want 3d You Gotts It ×  (Read 15016 times)

Offline johnny

  • TrailBrakingThrottleWhacker
  • ^ Quintessential Motobricker
  • Posts: 7653
  • Whacking...n...Chopping Sliding...n...High Siding
You Want 3d You Gotts It ×
« on: October 16, 2019, 10:11:17 AM »
greetings...

please start 3d threads on this board...

and if there are existing poasts abouts 3d please poast the link here in this thread if you want the poast moved to this board...

enjoy...

j o
  • :johnny i parks my 96 eleven hundert rs motobrick in dodge county cheezconsin  :johnny

Offline bmwcyclist

  • ^ Motobrick Curious
  • Posts: 53
Re: You Want 3d You Gotts It ×
« Reply #1 on: November 21, 2019, 10:41:23 PM »
I would love to have some brick bits to print.

Here are a few things on thingiverse.

Beta clutch tool

https://www.thingiverse.com/thing:959712

tragkorb repair

https://www.thingiverse.com/thing:2183440

Seat / tank rubber cover replacement clamp

https://www.thingiverse.com/thing:3544051

Turn signal button

https://www.thingiverse.com/thing:3240741

Battery tray mount Yuasa TTz10s

https://www.thingiverse.com/thing:3585049

.



  • Batavia Oh
  • K75 1990, K75RT 1995
Agree Agree x 1 View List

Offline djaysan

  • Motobrick Curious
  • Posts: 15
  • Proud owner of a K1100 RS 93'
Re: You Want 3d You Gotts It ×
« Reply #2 on: December 10, 2019, 03:16:43 PM »
https://bike3dparts.alainorset.com/

I think this website has pretty all about it ;)
  • Poland
  • F800R, K1100 RS
Proud owner of K1100RS 93' after selling my F800R 11'

Offline Motorhobo

  • +20 years of K75
  • ^ Quintessential Motobricker
  • Posts: 1512
Re: You Want 3d You Gotts It ×
« Reply #3 on: March 09, 2020, 11:01:28 AM »
I'm going to try the sidecase hinges next time the ones I have break. Those OEM hinges are crap.
1994/1995 K75 ABS Frankenbike: original engine 136k miles, frame from Gary Weaver (RIP), 173k miles -- Current Odometer: 193k miles
1994 K75 since 2013, 76,000 mi (11k mine) w/California Sidecar Friendship II Sidecar & Black Lab 'Miss B'

Past: 1974 Honda 550/4 (first bike), 1994 K75 (sold), 1995 K75 ABS (parts bike), Sidecar Dog & Best Bud 'Bo' - RIP

Offline bmwcyclist

  • ^ Motobrick Curious
  • Posts: 53
Re: You Want 3d You Gotts It ×
« Reply #4 on: March 09, 2020, 11:04:56 AM »
Let me know how that goes.

I assume you are going to print using ABS?
  • Batavia Oh
  • K75 1990, K75RT 1995

Offline djaysan

  • Motobrick Curious
  • Posts: 15
  • Proud owner of a K1100 RS 93'
Re: You Want 3d You Gotts It ×
« Reply #5 on: April 14, 2020, 02:34:04 AM »
Hello guys , found another website sharing some key 3d part models such as speedo cases for motoscope and even airbox grid :

https://www.fiveaces.hk/index.php/support/bmw-3d-parts
  • Poland
  • F800R, K1100 RS
Proud owner of K1100RS 93' after selling my F800R 11'

Offline triplek

  • Motobrick Curious
  • Posts: 47
"Every time you criticize my grammar, I like you a little bit fewer."

1995 K75 RTP, 1995 K75 RT, 1993 K75, two K75 frames, 1 fully assembled engine from airbox to exhaust tip and enough fairings and  parts to build another K. Soon.  ;)

Offline stokester

  • ^ SuperNatural Motobricker
  • Posts: 830
Re: You Want 3d You Gotts It ×
« Reply #7 on: March 20, 2022, 06:39:14 PM »
I'm going to try the sidecase hinges next time the ones I have break. Those OEM hinges are crap.
Never had an issue with mine.  The only time they broke is when I low-sided on sand into a ditch and they broke probably by design which saved the case. 

They are $8.50 ea.
  • Yorktown Virginia
  • '94 K75S Dakar Yellow - '93 K75S Seiden Blau - '91 R100RT Bermuda Blue- '78 R100S Smoke Red
Agree Agree x 1 View List

Offline frankenduck

  • Adrninistrator
  • ^ Quintessential Motobricker
  • Posts: 5275
Re: You Want 3d You Gotts It ×
« Reply #8 on: March 20, 2022, 06:58:19 PM »
I'm going to try the sidecase hinges next time the ones I have break. Those OEM hinges are crap.

I use aluminum piano hinges.

http://www.kbikeparts.com/classickbikes.com/ckb.tech/0.ckb.tech.files/pianohinge/pianohinge.htm
Once I had a Collie pup. Dug a hole and covered him up. Now I sit there by the hour. Waiting for a Collie-flower.
New to K bikes? Click here.
K Bike Maintenance & Mods: Click here.
Buy parts here.

Offline Motorhobo

  • +20 years of K75
  • ^ Quintessential Motobricker
  • Posts: 1512
Re: You Want 3d You Gotts It ×
« Reply #9 on: June 01, 2022, 09:10:22 AM »
Let me know how that goes.

I assume you are going to print using ABS?

I never did it probably because it wasn't going to work with the filaments I have lying around. ABS and PETG are to hard and brittle. You'd have to use nylon or vinyl filaments and spending $30 bucks for a roll of filament that might or might not work is kind of not a good cost/benefit ratio. Plus, they'd need lots of supports due to the overhang that would be a bitch to remove or you'd need water soluble supports and a multi-extruder printer which I don't have.
1994/1995 K75 ABS Frankenbike: original engine 136k miles, frame from Gary Weaver (RIP), 173k miles -- Current Odometer: 193k miles
1994 K75 since 2013, 76,000 mi (11k mine) w/California Sidecar Friendship II Sidecar & Black Lab 'Miss B'

Past: 1974 Honda 550/4 (first bike), 1994 K75 (sold), 1995 K75 ABS (parts bike), Sidecar Dog & Best Bud 'Bo' - RIP

Offline The Mighty Gryphon

  • Administrator
  • ^ Quintessential Motobricker
  • Posts: 6719
Re: You Want 3d You Gotts It ×
« Reply #10 on: June 01, 2022, 12:26:52 PM »
Those hinges are polypropylene and molded so they can flex at the pivot point.  I would suspect that they would not be very successful if 3D printed.  At $8.50 a pop for the factory part they're one item I wouldn't hesitate getting from BMW.
  • In my garage in Marilla, NY
  • '91K100RS White/Blue
Current:
'91 K100RS16V "Moby Brick Too"

Past:
'94 K75RT "Ilsa, She Wolf of the SS"
'92 K100RS16V "Moby Brick" (RIP, deceased in a vehicular assault)
'94 K75S Special Edition Dakar Yellow "Cheetos"
'89 K100RS Special Edition "Special Ed"

Offline frankenduck

  • Adrninistrator
  • ^ Quintessential Motobricker
  • Posts: 5275
Re: You Want 3d You Gotts It ×
« Reply #11 on: June 01, 2022, 12:41:39 PM »
BTW; If you're ever out touring and a hinge breaks then 2 or 3 layers of duct tape makes for an adequate temporary repair. BTDT.
Once I had a Collie pup. Dug a hole and covered him up. Now I sit there by the hour. Waiting for a Collie-flower.
New to K bikes? Click here.
K Bike Maintenance & Mods: Click here.
Buy parts here.

Offline The Mighty Gryphon

  • Administrator
  • ^ Quintessential Motobricker
  • Posts: 6719
Re: You Want 3d You Gotts It ×
« Reply #12 on: June 01, 2022, 01:47:09 PM »
Or you can carry a spare hinge. 

They take up virtually no space and will guarantee that you will never have one break.  If necessary, they can be changed in 5 minutes on the side of the road with no tools.   
  • In my garage in Marilla, NY
  • '91K100RS White/Blue
Current:
'91 K100RS16V "Moby Brick Too"

Past:
'94 K75RT "Ilsa, She Wolf of the SS"
'92 K100RS16V "Moby Brick" (RIP, deceased in a vehicular assault)
'94 K75S Special Edition Dakar Yellow "Cheetos"
'89 K100RS Special Edition "Special Ed"

Offline sj2000

  • ^ Proficient Motobricker
  • Posts: 133
Re: You Want 3d You Gotts It ×
« Reply #13 on: January 17, 2024, 09:15:42 PM »
  • Parker, USA
  • 1985 K100

Tags: