Author Topic: Use 3 relays to emulate neutral from the instrument cluster  (Read 5915 times)

Offline frankenduck

  • Adrninistrator
  • ^ Quintessential Motobricker
  • Posts: 3653
Use 3 relays to emulate neutral from the instrument cluster
« on: August 25, 2011, 06:10:57 PM »
On K bikes the starter button only has power if a) the clutch is pulled in or b) the bike is in neutral.  The power to the start button when in neutral is controlled by the gear position circuit board in the instrument cluster.  If you swap in another type of instrument cluster or that circuit board goes bad then you'll only be able to start the bike with the clutch pulled in.

However, provided that the gear position switch on the back of the transmission is working properly, you can emulate the functionality that lets you start the bike in neutral with a set of three relays in series.

93 K11LT
94 K11RS- "Kato"
86-97 K75F (K75/100/1100 Frankenbrick)
86 K75C w/ paralever, high perf. cams,TURBO!
91 K1
86 custom K100
and 2 more
IBA #17739 (SS1K, BBG, 50CC)

Buy parts HERE

Offline MikeisonTV

  • MikeisonTV
  • Motobrick Curious
  • Posts: 32
Re: Use 3 relays to emulate neutral from the instrument cluster
« Reply #1 on: September 12, 2013, 06:08:23 PM »
can u repost this pic??!?!?

Offline rbm

  • ^ Quintessential Motobricker
  • Posts: 1942
  • Regards, Robert
Toronto, Ontario

1987 K75 - Build Blog @http://k75retro.blogspot.ca/

Tags: