After searching the interwebz and finding nothing aside from crash bar mounted pegs, I had to make something up. Didn’t feel like spending a few hundred on crash bars, and really needed a second leg position for a ride from Nashville to Miami. So I made my own.
Basically I used two 3/8”x12” bolts attached to my engine spoiler bracket.
Notice the top bolt has had a few threads grinded down to keep it from hitting the oil tank fins (for the starboard side).
I heated each bolt with a propane torch until it was hot enough to bend to an angle that made it parallel with the road when attached to the spoiler brackets.
I drilled holes in the spoiler brackets with a bit slightly larger than 3/8” and bolted the new pegs on using two nuts, and lock washers.
After first testing them out I was uncomfortable with how much the brackets flexed over bumps so I fitted some quick supports out of 1/16” cable and cut up pieces of jeans to protect the engine cover (I only had a day’s notice before going to Miami, so I just made something that worked).
And came out with this:
Yea they’re lopsided… but it saved me some cash, and my legs. Just posting to throw some ideas out there for others.