Author Topic: K100 2V Bearing Cross Reference ~ author bert vogel  (Read 3206 times)

Offline wmax351

  • ^ Quintessential Motobricker
  • Posts: 1231
K100 2V Bearing Cross Reference ~ author bert vogel
« on: June 03, 2013, 11:40:24 PM »
Bump for new bearing cross ref

K100 2V Bearing Cross Reference ~ author bert vogel

It seems NTN or SNR (or other) 32203 bearings will be a direct replacement for the swingarm bearings on our bricks. 17x17.25x40. The width on these is measured differently on different sites, but it is an exact match for what we need. These bearings seem to be hard to find, but I managed to find some SNR brand bearings from www.motionindustries.com. They are apparently a super heavy duty series that usually doesn't start that small.
  • Ann Arbor, MI on the way to ABQ, NM
  • 1991 BMW K75 Standard, Refreshed '94 engine
Bikes:
Current:1991 BMW K75 Standard, 1998 Moto Guzzi California EV11
Past: '83 BMW R65LS, '75 Honda CB550F, '69 Honda CB175, 1999 Royal Enfield Bullet 500, 1973 Triumph Tiger TR7V, 1971 BMW R75/5 in Toaster outfit, 1979 Harley Davidson XLS-1000 Sportster Roadster

Offline dglcinc

  • Motobrick Curious
  • Posts: 21
Re: K100 2V Bearing Cross Reference ~ author bert vogel
« Reply #1 on: March 07, 2016, 08:01:10 PM »
Thanks, I just realized I forgot I used this reference when I did some maintenance last Spring. Some of these are available on Amazon and E-Bay. I also just found another source for the swingarm bearings (ordered some just in case): LocateBallBearings.com.

Awesome cross reference, thanks for posting.
  • New Jersey
  • 1987 K75S candy red 45K

Tags: