Author Topic: Substitute for Three Bond 1207B  (Read 10237 times)

Offline conybeare

  • ^ Motobrick Curious
  • Posts: 96
  • Conybrick
Substitute for Three Bond 1207B
« on: February 08, 2012, 07:58:59 PM »
Hi All,

From looking through some threads on BMWMOA, it looks like some people use Permatex Ultra Grey on the water/oil pump whereas others use Yamabond or Hondabond (in lieu of the recommended Three Bond 1207b).

Just out of curiosity, what have you all used on the water/oil pump?

-D
  • Saint Paul MN
Current:
Nothing :o

Previous: 2004 R1100S, 2009 Yamaha FZ6,1990 K75S, 1986 K75C, 1984 Honda VT500 Ascot, 1981 Suzuki GS250T

Offline robleyd

  • ^ Proficient Motobricker
  • Posts: 138
Re: Substitute for Three Bond 1207B
« Reply #1 on: February 08, 2012, 08:20:16 PM »
Loctite ® 587™ Blue Maxx Silicone is my choice for many jointing seals.
Motobrick member #70
1996 K1100 LT
1969 Triumph Bonneville

Offline wmax351

  • ^ Quintessential Motobricker
  • Posts: 1237
Re: Substitute for Three Bond 1207B
« Reply #2 on: February 09, 2012, 02:58:28 AM »
I've  been using anaerobic gasket maker/flange sealant. Got tipped off on it by Dave Gardner for use on cylinder base gaskets for airheads.

http://www.permatex.com/products/automotive/automotive_gasketing/anaerobic_gasket_makers.htm

Cures hard, comes off easy, seals well, dissolves in oil (when it is soft) and only cures when compressed into an anaerobic environment. Nice and sticky as well.
  • Albuquerque, NM
  • 91 BMW K75 Standard, 98 Moto Guzzi California EV
Bikes:
Current:1991 BMW K75 Standard, 1998 Moto Guzzi California EV11
Past: '83 BMW R65LS, '75 Honda CB550F, '69 Honda CB175, 1999 Royal Enfield Bullet 500, 1973 Triumph Tiger TR7V, 1971 BMW R75/5 in Toaster outfit, 1979 Harley Davidson XLS-1000 Sportster Roadster

Offline GASS95

  • Curious
  • Posts: 8
Re: Substitute for Three Bond 1207B
« Reply #3 on: February 13, 2012, 06:35:14 PM »
Hi D I 'm Keith I wanted a tube of wurth sig 3000 for spline lube couldn't find it.
A search turned up a moto guzzy site and I got a tube of the wurth and they had three bond
So I got some of that too! (Gass)
74 kz400(1 st bike in 81)
82 650 SC nitehawk(blue w/silver stripe)Crash@39,000mi.
95 k1100 LT(got in July 05)

Offline johnny

  • TrailBrakingThrottleWhacker
  • ^ Quintessential Motobricker
  • Posts: 7650
  • Whacking...n...Chopping Sliding...n...High Siding
Re: Substitute for Three Bond 1207B
« Reply #4 on: February 13, 2012, 07:30:48 PM »
  • :johnny i parks my 96 eleven hundert rs motobrick in dodge county cheezconsin  :johnny

Tags: