Author Topic: Scriminger pulse-jet ignition PJI - I know, I know... .  (Read 2450 times)

Offline DavidATL

  • ^ Proficient Motobricker
  • Posts: 175
Scriminger pulse-jet ignition PJI - I know, I know... .
« on: August 23, 2019, 08:53:07 AM »

This is may be almost as divisive as "what oil/ viscosity do you use?"  and certainly as flame-worthy. So please don't.

Anyone actually USE or TEST these?

https://pulse-jetignition.co.uk

https://www.motorworks.co.uk/vlive/Shop/Parts.php?T=6&Q=ELA01263
  • Atlanta
  • K75RT '92 w/ 28k miles (former bikes: '82 FT500, 80's GL500 Silverwing, 550 Nighthawk and FINALLY an '88 K75S) https://georgiaroads.wordpress.com including my #GA4corners route

Offline johnny

  • TrailBrakingThrottleWhacker
  • ^ Quintessential Motobricker
  • Posts: 7650
  • Whacking...n...Chopping Sliding...n...High Siding
Re: Scriminger pulse-jet ignition PJI - I know, I know... .
« Reply #1 on: August 23, 2019, 08:57:46 AM »
greetings...

there were several pashnit forum west coast members who had those things... they raved 100% positive back then...

that forum is down forever so no archive to look up those threads...

good luck with your whackness...

j o
  • :johnny i parks my 96 eleven hundert rs motobrick in dodge county cheezconsin  :johnny

Offline DavidATL

  • ^ Proficient Motobricker
  • Posts: 175
Re: Scriminger pulse-jet ignition PJI - I know, I know... .
« Reply #2 on: August 23, 2019, 09:10:36 AM »


yes, this is serious whackness
  • Atlanta
  • K75RT '92 w/ 28k miles (former bikes: '82 FT500, 80's GL500 Silverwing, 550 Nighthawk and FINALLY an '88 K75S) https://georgiaroads.wordpress.com including my #GA4corners route

Offline blackie1

  • ^ Proficient Motobricker
  • Posts: 246
  • christchurch nz
Re: Scriminger pulse-jet ignition PJI - I know, I know... .
« Reply #3 on: August 24, 2019, 02:11:05 AM »
please trial some and report back
  • christchurch, new zealand , where else would u want to live, really
  • 1991 K75RT naked 67,000kms

Offline Laitch

  • Faster than a speeding pullet
  • Administrator
  • ^ Quintessential Motobricker
  • Posts: 10119
Re: Scriminger pulse-jet ignition PJI - I know, I know... .
« Reply #4 on: August 24, 2019, 06:02:59 AM »
If it's flame-worthy then it should be flamed.

What's keeping you from being an adopter, David? Cost or fear? No pioneer spirit or sense of dedication to your cohort? It isn't like the Internet is depriving us of information.
  • Along the Ridley in Vermont.
  • 1995 K75 89,000 miles
I wept because I had no radials until I met a man who had no splines.
https://tinyurl.com/RillRider

Offline johnny

  • TrailBrakingThrottleWhacker
  • ^ Quintessential Motobricker
  • Posts: 7650
  • Whacking...n...Chopping Sliding...n...High Siding
Re: Scriminger pulse-jet ignition PJI - I know, I know... .
« Reply #5 on: August 25, 2019, 08:58:41 AM »
greetings...

i have decided to place an order for 8 of these units...

the powerstroke in my f-550 isnt running as clean as it did 200 thou ago... im thinking these will help with that... and the more donkeypower and the more miles per gallon is gonna be bonus...

so i pinged them... we have a trial set on the way to the motobrick garage... we can pass them around for proper beta field testing...here is the reply...

j o


Hi Johnny,

The PJI14LR doesn't fit the 2 or 4v K's due to the spark plug thread diameter, however we have just completed development of a 12mm version specifically for the in line K series, ie 75, 100 & 1100's. The production version will be available from 1st sept however if you wish to trial a set, I have a set that we have used on the Dyno for testing which I can send you for your appraisal along with the test data,  Dyno charts, emissions, fuel options etc.

Let me know if you want to try a set and your address, also the spec of the bike and any engine related modifications.

Regards,

Steve

  • :johnny i parks my 96 eleven hundert rs motobrick in dodge county cheezconsin  :johnny

Offline DavidATL

  • ^ Proficient Motobricker
  • Posts: 175
Re: Scriminger pulse-jet ignition PJI - I know, I know... .
« Reply #6 on: August 25, 2019, 10:29:41 AM »
greetings...

so i pinged them... we have a trial set on the way to the motobrick garage... we can pass them around for proper beta field testing...here is the reply...

j o


...


Johnny - you d'man! 



D
  • Atlanta
  • K75RT '92 w/ 28k miles (former bikes: '82 FT500, 80's GL500 Silverwing, 550 Nighthawk and FINALLY an '88 K75S) https://georgiaroads.wordpress.com including my #GA4corners route

Offline johnny

  • TrailBrakingThrottleWhacker
  • ^ Quintessential Motobricker
  • Posts: 7650
  • Whacking...n...Chopping Sliding...n...High Siding
Re: Scriminger pulse-jet ignition PJI - I know, I know... .
« Reply #7 on: November 26, 2019, 05:23:59 PM »
greetings...


* Screenshot_20191203-055237.jpg (20.98 kB . 768x376 - viewed 379 times)

as i sitts here with my life playing out over and over in my head... i come to realization that i did not poast up the initial findings and the final conclusion of my investigation of these remarkable devices...

snapped this...


* jetpule96k1100rs.jpg (11.83 kB . 324x576 - viewed 430 times)

moar power and moar miles per gallon and moar later...

j o
  • :johnny i parks my 96 eleven hundert rs motobrick in dodge county cheezconsin  :johnny

Tags: