Author Topic: K1200 engine on k1100  (Read 245 times)

Online mjones866

  • Curious
  • Posts: 5
K1200 engine on k1100
« on: June 10, 2019, 11:41:43 PM »
Been doing my research on such topic. Of course I know there will be problems to over come regarding intake and the EFI (planning on using microsquirt). Itís looking like K1100ís engines in the US are getting increasingly rarer to find with low mileage (best Iíve found is 29k, I still consider this relatively good mileage for this engine). I would like to know if anyone has had experience/knowledge of installing a K1200 engine block on a K1100. I plan/would like  to use the k1100 bell housing, clutch pack, and transmission. From what Iíve read (not a wealth of knowledge on the topic), the k1200 engine has the proper mounts for the k1100 frame. Iíd like to know if the k1100 bell housing will mate with the k1200 block, etc. any issues Iíd need to know about the starter motor and alternator with this configuration?

Thanks in advanced.
  • Atlanta, Ga
  • 1993 BMW K1100 LT (01/1993)
Matt

Offline Laitch

  • ^ Quintessential Motobricker
  • Posts: 6757
Re: K1200 engine on k1100
« Reply #1 on: June 10, 2019, 11:57:03 PM »
Thanks in advanced.
I don't accept thanks in advance.

You should read this.
  • Along the Ridley in Vermont.
  • 1995 K75T 72,000 miles
I wept because I had no radials until I met a man who had no splines.
http://www.motobrick.com/index.php/topic,296.msg53303.html#msg53303

Tags: