Author Topic: SOLD: Aeroflow tall fairing for K100/K1100  (Read 4892 times)

Offline Jim K in PA

  • Motobrick Curious
  • Posts: 17
SOLD: Aeroflow tall fairing for K100/K1100
« on: December 31, 2018, 01:53:31 PM »
I am a new member here on MB, as I just got my first K-bike last summer.  I have been primarily an airhead guy for the last 8 years. 

I got this fairing with the bike I bought from an older gentleman last summer.  He bought this new and never installed it.  It is still in the shipping box.  Screen is perfect/as new, but box is a little dirty.  Instructions and mounting bits included.

Still available new from Aeroflow for $$340.00 + shipping. http://www.aeroflowscreens.com/K100_1100RS/K100RS_K1100RS.htm

I am looking for $175.00 + shipping, which will be via USPS from 18360.  Box is large.

Best I can do for a pic of a clear screen is attached.  Ping me through the site if interested.

Thanks.
  • Pennsylvania
  • 1985 K100RS

Offline Jim K in PA

  • Motobrick Curious
  • Posts: 17
Re: Aeroflow tall fairing for K100/K1100
« Reply #1 on: January 10, 2019, 10:59:07 AM »
I'm guessing this is not a desirable piece?  Make an offer?
  • Pennsylvania
  • 1985 K100RS

Offline Jim K in PA

  • Motobrick Curious
  • Posts: 17
Re: Aeroflow tall fairing for K100/K1100
« Reply #2 on: January 10, 2019, 06:31:32 PM »
greetings...

they usually sell near the commencement and near the conclusion of the riding season in the snowbelt regions...

j o

A valid point!  Thanks for the feedback.

  • Pennsylvania
  • 1985 K100RS

Offline Jim K in PA

  • Motobrick Curious
  • Posts: 17
Re: Aeroflow tall fairing for K100/K1100
« Reply #3 on: April 18, 2019, 10:00:54 AM »
Pushing this back up - would like to get this box out of the shop.  Spring is here, and I will be needing a new fuel pump for the K100, so this goes to funding that.

PM or email through site is best.
  • Pennsylvania
  • 1985 K100RS

Offline beemermcr

  • Curious
  • Posts: 3
Re: Aeroflow tall fairing for K100/K1100
« Reply #4 on: April 18, 2019, 10:39:44 PM »
Several comments:

- I have been a big fan of Aeroflow on many BMWs
- This does not show a fit for the LT, and the website says it attaches with dual-lok?!?
- Postage for large boxes has been nuts lately, often exceeding the value of what is shipped, something you may be fighting.

All FYI.
  • Sandy, UT
  • 1995 K1100LT

Offline Jim K in PA

  • Motobrick Curious
  • Posts: 17
Re: Aeroflow tall fairing for K100/K1100
« Reply #5 on: April 19, 2019, 01:52:17 PM »
Several comments:

- I have been a big fan of Aeroflow on many BMWs
- This does not show a fit for the LT, and the website says it attaches with dual-lok?!?
- Postage for large boxes has been nuts lately, often exceeding the value of what is shipped, something you may be fighting.

All FYI.

Thanks. 

It looks like shipping would range from ~$20 to ~$60 from my zip of 18360 to east/west US.

It attaches via the bottom lip and several hook/loop fasteners.  Easily installed or removed.  The fasteners are all new.  This has not been mounted to a bike yet.

  • Pennsylvania
  • 1985 K100RS

Offline Jim K in PA

  • Motobrick Curious
  • Posts: 17
Re: Aeroflow tall fairing for K100/K1100
« Reply #6 on: June 24, 2019, 05:52:48 PM »
Just a summer bumpity.  Email or msg me through the forum. 

Thanks.
  • Pennsylvania
  • 1985 K100RS

Offline Rcgreaves

  • ^ SuperNatural Motobricker
  • Posts: 973
  • "I'd rather be flying, but this will do nicely"
Re: Aeroflow tall fairing for K100/K1100
« Reply #7 on: June 26, 2019, 07:24:09 AM »
My gut says shipping on that to my next door neighbor would exceed $20.  My zip 53554.  I need a stack o clutch main seal bits first for my 95 K11rs.  What’s bottom $ to me?
  • Livingston in Southwest WI. USA-"With the good earth all around."
  • 94' K75S, 85' GL1200 Aspencade, 96' VFR750F, 01' GL1800. Restoring: 95' K1100RS, 83' R80RT NEW: Motorvation Formula II
Doing “better than I deserve"

Offline Jim K in PA

  • Motobrick Curious
  • Posts: 17
Re: Aeroflow tall fairing for K100/K1100
« Reply #8 on: June 26, 2019, 11:13:45 AM »
My gut says shipping on that to my next door neighbor would exceed $20.  My zip 53554.  I need a stack o clutch main seal bits first for my 95 K11rs.  What’s bottom $ to me?

Check your PMs.

Box is 24 x 36 x 6 and under 10#.  I think your gut needs to be tuned. :D
  • Pennsylvania
  • 1985 K100RS

Offline Rcgreaves

  • ^ SuperNatural Motobricker
  • Posts: 973
  • "I'd rather be flying, but this will do nicely"
Re: Aeroflow tall fairing for K100/K1100
« Reply #9 on: June 26, 2019, 11:40:00 AM »
Ok tune me up- my guess is $45.  What does usps.com tell you?
  • Livingston in Southwest WI. USA-"With the good earth all around."
  • 94' K75S, 85' GL1200 Aspencade, 96' VFR750F, 01' GL1800. Restoring: 95' K1100RS, 83' R80RT NEW: Motorvation Formula II
Doing “better than I deserve"

Offline Jim K in PA

  • Motobrick Curious
  • Posts: 17
Re: Aeroflow tall fairing for K100/K1100
« Reply #10 on: June 26, 2019, 11:57:34 AM »
Ok tune me up- my guess is $45.  What does usps.com tell you?

Check your PM.

I suggested BETWEEN $20 and $60 was the range per USPS calculator.  Shipping to NJ is ~$28.  Shipping to Livingston WI is ~$40. San Francisco is ~$62.

All good.  Let me know if you want it.
  • Pennsylvania
  • 1985 K100RS

Offline Rcgreaves

  • ^ SuperNatural Motobricker
  • Posts: 973
  • "I'd rather be flying, but this will do nicely"
Re: Aeroflow tall fairing for K100/K1100
« Reply #11 on: June 26, 2019, 12:02:53 PM »
Gotcha pm sent
  • Livingston in Southwest WI. USA-"With the good earth all around."
  • 94' K75S, 85' GL1200 Aspencade, 96' VFR750F, 01' GL1800. Restoring: 95' K1100RS, 83' R80RT NEW: Motorvation Formula II
Doing “better than I deserve"

Offline Rcgreaves

  • ^ SuperNatural Motobricker
  • Posts: 973
  • "I'd rather be flying, but this will do nicely"
Re: Aeroflow tall fairing for K100/K1100
« Reply #12 on: June 28, 2019, 05:16:09 AM »
Jim

Full payment sent w shipping address.  Cart before horse ie windscreen before main seal but my other Aeroflow is outstanding.  Thanks for your kindnesses.  Clay
  • Livingston in Southwest WI. USA-"With the good earth all around."
  • 94' K75S, 85' GL1200 Aspencade, 96' VFR750F, 01' GL1800. Restoring: 95' K1100RS, 83' R80RT NEW: Motorvation Formula II
Doing “better than I deserve"

Offline Jim K in PA

  • Motobrick Curious
  • Posts: 17
Re: SOLD: Aeroflow tall fairing for K100/K1100
« Reply #13 on: June 28, 2019, 01:10:16 PM »
Sold to RCgreaves.
  • Pennsylvania
  • 1985 K100RS

Offline Rcgreaves

  • ^ SuperNatural Motobricker
  • Posts: 973
  • "I'd rather be flying, but this will do nicely"
Re: SOLD: Aeroflow tall fairing for K100/K1100
« Reply #14 on: July 05, 2019, 12:26:49 PM »
received in super condition.  $13 shipping seems so reasonable too...light weight ofcourse. What a very very cleaver attachment method.  thanks.
  • Livingston in Southwest WI. USA-"With the good earth all around."
  • 94' K75S, 85' GL1200 Aspencade, 96' VFR750F, 01' GL1800. Restoring: 95' K1100RS, 83' R80RT NEW: Motorvation Formula II
Doing “better than I deserve"

Tags: