Author Topic: DELETE- OFFER RECALLED 87 k 75 final drive  (Read 303 times)

Offline Rcgreaves

  • ^ Proficient Motobricker
  • Posts: 314
  • Parting out this 1987 S NOW, what do YOU need
DELETE- OFFER RECALLED 87 k 75 final drive
« on: September 11, 2018, 11:06:50 PM »
Ok so I removed my drive shaft and while the splines look goodand there’s zero slop in the joint—an internal u joint seal fell out as I inspected the part.  See my pictures.  Im not willing to sell this in this condition. Sorry.




9/24 Im not going to offer these given their condition.  Moderator kindly delete.


  • Livingston WI. USA-"With the good earth all around."
  • 1994 K75S 1987 K75S parts bike 1985 GL1200 Aspencade 1982 CM450A "Hondamatic"
Doing “better than I deserve”

Offline El Kabong

  • Motobrick Curious
  • Posts: 13
Re: FS 87 k75 final drive excellent splines
« Reply #1 on: September 12, 2018, 11:52:51 PM »
If Laitch doesn’t go for it I’m interested. Any chance you’re about to post a matching driveshaft?
  • Walla Walla, WA
  • 1990 K75

Offline Rcgreaves

  • ^ Proficient Motobricker
  • Posts: 314
  • Parting out this 1987 S NOW, what do YOU need
Re: FS 87 k75 final drive excellent splines
« Reply #2 on: September 13, 2018, 12:07:03 AM »
You are #2 sir.  I’ll pull the matching driveshaft tomorrow and supply pictures gnight😩
  • Livingston WI. USA-"With the good earth all around."
  • 1994 K75S 1987 K75S parts bike 1985 GL1200 Aspencade 1982 CM450A "Hondamatic"
Doing “better than I deserve”

Offline El Kabong

  • Motobrick Curious
  • Posts: 13
Re: FS 87 k75 final drive excellent splines
« Reply #3 on: September 13, 2018, 12:14:55 AM »
Thank you! I hope to get the chance to purchase those both.
  • Walla Walla, WA
  • 1990 K75

Offline El Kabong

  • Motobrick Curious
  • Posts: 13
Re: FS 87 k75 final drive excellent splines
« Reply #4 on: September 16, 2018, 02:19:10 PM »
Any progress on this deal?
  • Walla Walla, WA
  • 1990 K75

Offline Rcgreaves

  • ^ Proficient Motobricker
  • Posts: 314
  • Parting out this 1987 S NOW, what do YOU need
Re: FS 87 k75 final drive excellent splines
« Reply #5 on: September 16, 2018, 08:59:53 PM »
Any progress on this deal?

El kabobs:  the weather has been outstanding here of late thusly my

Daily driver added about a thousand clicks this past week.  I the next day or two the shaft will come out and I’ll assess w pics.. stay tuned
 Clay 6097261554
  • Livingston WI. USA-"With the good earth all around."
  • 1994 K75S 1987 K75S parts bike 1985 GL1200 Aspencade 1982 CM450A "Hondamatic"
Doing “better than I deserve”

Offline Rcgreaves

  • ^ Proficient Motobricker
  • Posts: 314
  • Parting out this 1987 S NOW, what do YOU need
Re: FS 87 k75 final drive and ***drive shaft ***excellent splines
« Reply #6 on: September 19, 2018, 06:54:46 PM »
Prospects 1and 2 are out lookin for a buyer for this drive unit
  • Livingston WI. USA-"With the good earth all around."
  • 1994 K75S 1987 K75S parts bike 1985 GL1200 Aspencade 1982 CM450A "Hondamatic"
Doing “better than I deserve”

Offline Rcgreaves

  • ^ Proficient Motobricker
  • Posts: 314
  • Parting out this 1987 S NOW, what do YOU need
Re: FS 87 k75 final drive and ***drive shaft ***excellent splines
« Reply #7 on: September 21, 2018, 04:12:55 PM »
Sooo I need some expertise on this.

My driveshaft splines look fine but this ...is it a grease seal... plinked off the u joint when I was cleaning it up after removal.

There's a shop in Green Bay WI called Machine Services that specializes in Ujoints and from their shop guy Mitch I was told that for $130 they would install a new u joint on my drive shaft. Apparently, these units are not serviceable. 

What advice can you all offer?  I think I need to remove these items from the for sale listing and perhaps shelve these for a rainy day.  If these little rings are grease seals or dust seals my joint would fail prematurely if sold to an unsuspecting bricker...
  • Livingston WI. USA-"With the good earth all around."
  • 1994 K75S 1987 K75S parts bike 1985 GL1200 Aspencade 1982 CM450A "Hondamatic"
Doing “better than I deserve”

Offline The Mighty Gryphon

  • ^ Quintessential Motobricker
  • Posts: 3764
Re: PENDING 87 k75 final drive and ***drive shaft ***excellent splines
« Reply #8 on: September 21, 2018, 05:05:19 PM »
Got any pitchures?
  • In my garage in Marilla, NY
  • '94 K75RT Mystic Red, '92K100RS White, '94 K75S Dakar Yellow
Current:
'94 K75RT "Ilsa, She Wolf of the SS"
'94 K75S "Cheetos"
'91 K100RS "Moby Brick Too

Offline Rcgreaves

  • ^ Proficient Motobricker
  • Posts: 314
  • Parting out this 1987 S NOW, what do YOU need
Re: PENDING 87 k75 final drive and ***drive shaft ***excellent splines
« Reply #9 on: September 21, 2018, 05:06:21 PM »
Yes scroll up.. Gryph call me please 6087099728
  • Livingston WI. USA-"With the good earth all around."
  • 1994 K75S 1987 K75S parts bike 1985 GL1200 Aspencade 1982 CM450A "Hondamatic"
Doing “better than I deserve”

Offline johnny

  • TrailBrakingThrottleWhacker
  • ^ Quintessential Motobricker
  • Posts: 6120
  • Whacking...n...Chopping Sliding...n...High Siding
Re: PENDING 87 k75 final drive and ***drive shaft ***excellent splines
« Reply #10 on: September 21, 2018, 06:57:38 PM »
greetings...

i had one whack... went the distance by cleaning it up and taking high quality electrical tape and wraping it slowly until it looked like it would go the distance...

secured it with a tiny stainless zipptie... went at least another 45 thou before i replaced it...

j o
  • i parks my 96 eleven hundert rs motobrick in dodge county cheezconsin...
:usa#1

Offline Rcgreaves

  • ^ Proficient Motobricker
  • Posts: 314
  • Parting out this 1987 S NOW, what do YOU need
Re: PENDING 87 k75 final drive and ***drive shaft ***excellent splines
« Reply #11 on: September 21, 2018, 07:40:04 PM »
Wow.  Makes sense.  As a backup that’s a good plan... for planning a curcuit of Lake Superior some day soon...maybe a fresh shaft is best...
  • Livingston WI. USA-"With the good earth all around."
  • 1994 K75S 1987 K75S parts bike 1985 GL1200 Aspencade 1982 CM450A "Hondamatic"
Doing “better than I deserve”

Tags: