Author Topic: K100RT Scrambler(or something) project  (Read 1815 times)

Offline Postman

  • Motobrick Curious
  • Posts: 19
K100RT Scrambler(or something) project
« on: August 20, 2017, 11:57:12 AM »
Greetings from Finland! Started my project yesterday. Welding will be next work.

Where do you replace horns or just cut wires off? There is a space for one horn on the right side over the engine(behind the radiator).

I'm gonna cut original exhaust shorter and use it.

Has anyone made a seat platform from fiberglass?

Lähetetty minun SM-G800F laitteesta Tapatalkilla

  • Finland
  • 1985 K100rt

Offline critter

  • Motobrick Curious
  • Posts: 38
Re: K100RT Scrambler(or something) project
« Reply #1 on: August 31, 2017, 03:45:43 AM »
Greetings from Finland! Started my project yesterday. Welding will be next work.

Where do you replace horns or just cut wires off? There is a space for one horn on the right side over the engine(behind the radiator).

I'm gonna cut original exhaust shorter and use it.

Has anyone made a seat platform from fiberglass?

Lähetetty minun SM-G800F laitteesta Tapatalkilla
evening
horn i mounted on hole in front of tank  looks ok,well i think it does
  • australia
  • k100

Offline Postman

  • Motobrick Curious
  • Posts: 19
Re: K100RT Scrambler(or something) project
« Reply #2 on: September 02, 2017, 01:14:18 AM »
Ok. Thanks! Do you have any photos of those horn mountings?

Lähetetty minun SM-G800F laitteesta Tapatalkilla

  • Finland
  • 1985 K100rt

Offline Skunky

  • ^ Proficient Motobricker
  • Posts: 139
K100RT Scrambler(or something) project
« Reply #3 on: September 02, 2017, 02:04:43 PM »
Hi I have made mine using the tailpiece from an RT and strong plastic cut to shape some use steel and I've even seen wood used.  Not quite finished yet but I think it doesn't look too bad


Sent from my iPhone using Tapatalk
  • Derby GB
  • BMW K100lt
Rebuild it and they will come..
90 K100lt

Offline critter

  • Motobrick Curious
  • Posts: 38
Re: K100RT Scrambler(or something) project
« Reply #4 on: September 03, 2017, 02:58:07 AM »
you have done fine job on trim i did one today and is bland compared to yours keep the progress shots coming :2thumbup:
  • australia
  • k100

Offline Postman

  • Motobrick Curious
  • Posts: 19
Re: K100RT Scrambler(or something) project
« Reply #5 on: October 31, 2017, 10:25:05 AM »
Finally cutting the frame and welding

Lähetetty minun SM-G390F laitteesta Tapatalkilla

  • Finland
  • 1985 K100rt

Offline Postman

  • Motobrick Curious
  • Posts: 19
Re: K100RT Scrambler(or something) project
« Reply #6 on: January 14, 2018, 06:44:14 AM »
Proggress or not but frame welded. Ignition key replaced to airbox. Next steps:

- fork gaiters
- speedometer
- seat frame laminating
- new handlebars
- Heidenau K60 tyres
- tank paint strip
- leather bags for triangles
- new rear brake fluid container
- front fender cut
- horns relocation

Still wondering about those horns how to relocate????

Still asking photos of horn relocations?

Lähetetty minun SM-G390F laitteesta Tapatalkilla

  • Finland
  • 1985 K100rt

Offline Postman

  • Motobrick Curious
  • Posts: 19
Re: K100RT Scrambler(or something) project
« Reply #7 on: January 22, 2018, 10:26:25 AM »
Seat platform

Lähetetty minun SM-G390F laitteesta Tapatalkilla

  • Finland
  • 1985 K100rt

Offline Boxermann

  • ^ Proficient Motobricker
  • Posts: 133
Re: K100RT Scrambler(or something) project
« Reply #8 on: January 23, 2018, 03:41:58 AM »
Greetings from a Swede in Norway.

I bought a small and cheap (3 usd) horn on eBay and placed it behind the radiator. Works great. Can't say I've used it much though...

Will try to take a picture when I get home.
  • Norway
  • K100 / '87

Offline Boxermann

  • ^ Proficient Motobricker
  • Posts: 133
Re: K100RT Scrambler(or something) project
« Reply #9 on: January 23, 2018, 03:48:13 AM »
  • Norway
  • K100 / '87

Offline Postman

  • Motobrick Curious
  • Posts: 19
Re: K100RT Scrambler(or something) project
« Reply #10 on: January 23, 2018, 04:50:27 AM »
Thanks boxermann

Lähetetty minun SM-G390F laitteesta Tapatalkilla

  • Finland
  • 1985 K100rt

Offline Postman

  • Motobrick Curious
  • Posts: 19
Re: K100RT Scrambler(or something) project
« Reply #11 on: February 04, 2018, 02:50:14 PM »
Paint stripped from fuel tank

Lähetetty minun SM-G390F laitteesta Tapatalkilla

  • Finland
  • 1985 K100rt

Offline Postman

  • Motobrick Curious
  • Posts: 19
Re: K100RT Scrambler(or something) project
« Reply #12 on: February 10, 2018, 02:04:41 PM »
Todays job. Two new horns hidden behind radiator under the tank. BEP3.0 wired.

Lähetetty minun SM-G390F laitteesta Tapatalkilla

  • Finland
  • 1985 K100rt

Offline Skunky

  • ^ Proficient Motobricker
  • Posts: 139
  • Derby GB
  • BMW K100lt
Rebuild it and they will come..
90 K100lt

Offline Postman

  • Motobrick Curious
  • Posts: 19
Re: K100RT Scrambler(or something) project
« Reply #14 on: March 02, 2018, 02:17:05 PM »
Some progress..

Lähetetty minun SM-G390F laitteesta Tapatalkilla
  • Finland
  • 1985 K100rt

Offline Postman

  • Motobrick Curious
  • Posts: 19
Re: K100RT Scrambler(or something) project
« Reply #15 on: March 08, 2018, 05:16:24 PM »
Bar end indicators and seat

Lähetetty minun SM-G390F laitteesta Tapatalkilla

  • Finland
  • 1985 K100rt

Offline DJEwen

  • Motobrick Curious
  • Posts: 35
Re: K100RT Scrambler(or something) project
« Reply #16 on: March 08, 2018, 07:18:35 PM »
This is looking lovely, Postman. I especially love the tan colour of your seat. Do you have any more pictures of the finished rear hoop? I’m on two minds at the moment on wether to use the original frame tube that reduces or to replace with 30mm all round on my own build, wasn’t sure how it would look.
  • Scotland
  • 1985 K100, 1987 K100 LT

Offline Postman

  • Motobrick Curious
  • Posts: 19
Re: K100RT Scrambler(or something) project
« Reply #17 on: March 09, 2018, 05:16:22 AM »
Thanks! My plan is to make short rear fender with LED rear light and licence plate. I have small 15mm LED indicators for rear. Not sure how to put those but will see what happens.

I used original rear end of the frame which is shortened about 20cm. More photos later..

Lähetetty minun SM-G390F laitteesta Tapatalkilla

  • Finland
  • 1985 K100rt

Offline Postman

  • Motobrick Curious
  • Posts: 19
Re: K100RT Scrambler(or something) project
« Reply #18 on: April 19, 2018, 12:32:46 PM »
Springtime

Lähetetty minun SM-G390F laitteesta Tapatalkilla

  • Finland
  • 1985 K100rt

Tags: